Our Club Series Formula Car Mirrors include an angled stem, but a straight stem works better in many installations. If the mounting surface is close to horizontal, you may want to install this straight stem in place of the angled stem for better adjustability.
This black anodized aluminum stem measures 3.25" long. Approximately 2 inches of the stem will be inside the mirror housing when installed, leaving only 1.25" of stem exposed. This results in a very low-profile installation, but the mounting surface must be fairly high relative to the driver's head. Mounting base and ball joint are sold separately.
Note: This stem is not threaded all the way through. If you shorten the stem, you will need to drill and tap new threads on the cut-off end.