45 Degree Bent Banjo #2 Hose End, 3/8 inch (10mm)
This banjo hose end is designed to work with our -2 PTFE Lined Stainless Braided Hose (Part No. 3260-2, sold separately). It has a 45 degree bend in the tube for access in tight areas.
These hose end fittings are reusable although the brass sleeve must be replaced each time a fitting is reused. One sleeve is included with each hose end. We also offer the Spare -2 Brass Sleeves separately, Part No. 3261-2-SLEEVE.
Requires a 3/8" or 10mm Banjo Bolt and two 3/8" Copper Crush Washers (Part No. 3241-3/8), sold separately.
AN Hose Ends & Braided Stainless PTFE Brake / Clutch Hose
Click image for big picture