This genuine Girling reservoir has a 7/16-20 male threaded outlet fitting which can be mounted directly on a remote master cylinder with matching thread (such as our Part No. 3502*) or connected with a 4AN hose. Requires 3" master cylinder spacing if mounted directly on the cylinder. Translucent plastic allows easy fluid level inspection. 4.75" high without fitting. Capacity is approximately 7 ounces. Includes cap. These reservoirs no longer include a moisture barrier diaphragm.
We also offer the Replacement Girling Cap separately (Part No. 3573).
* Note: Part No. 3502 is now furnished with an inverted flare at the seat of the inlet port. You may need to grind the convex flare off the end of the 4AN fitting and use a crush washer to seal at the port face.