Brand: Pegasus Silicone Hose
This hose is built for endurance and performance in custom turbo intake systems. Silicone rubber with 4-ply reinforcement makes this hose tough, reliable, and flexible to temperatures from -60°C to +180°C (-76°F to +356°F).
Hump hoses are designed to join two intake tubes while adding a flexible joint to isolate engine vibrations. Hand crafted and quality inspected to the highest European standards. Bright blue with a smooth, shiny "wipe-down" finish. Approximately 4" long overall. The 4-ply reinforcement results in a working pressure rating in excess of 20 psi and a 5.5mm wall thickness (100mm / 4" OD). Use our Hose Joiners (HJ89) and our Lined Hose Clamps (Part No. 3613-4.25) to construct the exact shapes you need.
Silicone hose is for use on intake systems only. It is NOT for use on exhaust! Exceeding the temperature rating of 356°F will destroy it.