Brand: Redhead Valves
|This item qualifies for FREE Shipping in the continental United States!
The first Redhead fueling valves were originally designed to refuel Indy cars quickly and safely, without spillage. Redhead Dry Break valves were first patented in 1972. Today Redhead valves are found on professional racecars from NASCAR to LeMans (and, of course, Indy).
The Redhead Push-Pull series are simple to use. Just Push the male probe into the female receptacle, and both valves open. Pull them apart, and they both close securely. No fumbling with triggers or levers. The 2.0" PP20 Series is the original size and still the standard used on most racecars.
This female receptacle valve mounts on your vehicle, usually taking the place of a fender-mounted filler. The anodized aluminum body (bulb) can be clamped into 3 inch ID rubber hose (sold separately). The round aluminum mounting flange has a 4 3/4" OD and 3 7/8" ID with a 4.3" 9-hole mounting pattern (drilled for 5mm bolts). Flows approximately 2 gallons per second when connected to the Redhead PP20M Male Probe Push-Pull Refueling Valve (Part No. RHV-PP20M, sold separately).
NOTE: This is the genuine Redhead brand "Push-Pull" series refueling valve. This design is not interchangeable with any other type on the market. Do not attempt to mate a different brand or series probe to this Push-Pull receptacle. When in doubt, replace both ends!