These banjo-type hose end fittings are designed to work with our -2 PTFE Lined Stainless Braided Hose (Part No. 3260-2, sold separately). They are easily installed in the field without any special tooling required. The 20 degree bend helps the hose to clear obstructions in tight installations. Sold individually.
These fittings are reusable, although the brass sleeve must be replaced each time a fitting is reused. One sleeve is included with each hose end. We also offer the Spare -2 Brass Sleeves separately, Part No. 3261-2-SLEEVE.
The banjo end accepts a 5/16" or 8mm banjo bolt (sold separately). Remember to order 5/16" / 8mm Copper Crush Washers (Part No. 3241-5/16, sold separately).
