Brand: Davies Craig
|This item qualifies for FREE Shipping in the continental United States!|
Davies Craig Electric Water Pumps replace and out-perform all existing belt-driven water pumps available today. See an increase in cooling capacity while freeing up valuable horsepower.
The 130 liter per minute EWP130 model is rated for normally-aspirated, unmodified large 6-cylinder and V-8 engines up to 4.0L. Larger engines can use two pumps (Example: McLaren-Mercedes V-8 F1 cars used one pump per cylinder bank). It is also ideal for additional cooling for large intercooler heat exchangers. The aluminum alloy body weighs just 2.6 pounds, and the brushless motor draws only 10 amps at full flow.
Included in the kit is everything you need to fit it to your vehicle in an afternoon, including easy to follow installation instructions. Inlet and outlet ports have 6-bolt flanges to accept bolt-on fittings. One straight and one 90 degree fitting are included to fit 35mm (1 3/8") ID coolant hose. Both will fit either the inlet or outlet. The fittings can be arranged in dozens of different configurations to suit just about any installation. Adapter sleeves are included to fit 38mm (1 1/2") ID hoses. Optional bolt-on adapters with threaded fittings are also available separately.
This complete kit also includes the Davies Craig LCD Water Pump Controller. This controller electronically senses engine heat and adjusts the rate of coolant flow accordingly, even after engine shut down. Simply set your desired engine temperature and let the controller do the rest! Use the included inline adapter to install the temperature sensor (also included) in your 1 3/8" or 1 1/2" hose.
Note: Vehicles running on Liquid Propane Gas (LPG) should also use the Davies-Craig EBP15 Electric Booster Pump in the heater line to prevent freezing of the LPG in the converter.