Fuel Hose, 3" I.D. 45 degree Elbow, 6" Legs

Brand: Pegasus Silicone Hose

This 3" (76mm) ID hose combines the tough flexibility and good looks of our black silicone coolant hoses with a fuel-and oil-resistant fluorocarbon rubber (FKM) inner liner. It is ideal for use as a fuel filler hose (connecting your fender filler to your fuel tank or fuel cell) or other low-pressure fluid transfer applications. The single-ply fabric reinforcement makes it relatively soft and very flexible. Pre-molded 45 degree elbow, black only.

Temperature rating: 300°F continuous, 400°F intermittent (0°F minimum)
Pressure rating: 43 psi burst, 8 psi working
Outer layer: VMQ silicone rubber
Inner liner: FKM fluorocarbon rubber
Reinforcement: 1 ply aramid fabric
ID: 76mm (3")
Wall thickness: 3mm (1/8")
OD: 82mm (3.25")