The best oil cooler can't cool anything if it isn't getting a supply of fresh, cool air. If your cooler is suffocating, attach this shroud to your cooler and run a 3" hose from a high-pressure area to the shroud.
The outlet of the thermoformed ABS shroud is sized to cover the face of a Setrab 19-row Series 6 oil cooler (sold separately).* The inlet side has a snout to accept a single 3" ID duct hose such as our Part No. 3620-3.00 (sold separately). Cutouts in the shroud are positioned to clear the cooler inlet and outlet fittings on Setrab Pro Line single-pass coolers (other models might require a little modification).* Measures approximately 6 3/4" deep overall. Sold individually, one required per cooler. Black only.
* Note: The shroud is partially cut out, in order to be a tight fit to a cooler with the mounting tabs cut off. If you will be keeping the tabs on your cooler intact, you will need to cut out additional notches in the shroud.
