The best oil cooler can't cool anything if it isn't getting a supply of fresh, cool air. If your cooler is suffocating, simply attach this shroud to your cooler and run two 3" hoses from a high-pressure area to the shroud.
The outlet of the thermoformed ABS shroud is sized to cover the face of a Setrab 34-row Series 6 oil cooler (sold separately).* The inlet side has a pair of snouts to accept dual 3" ID duct hoses such as our Part No. 3620-3.00 (sold separately). Cutouts in the shroud are positioned to clear the cooler inlet and outlet fittings on Setrab Pro Line single-pass coolers (other models might require a little modification).* Measures approximately 6 1/2" deep. Sold individually, one required per cooler. Black only.
* Note 1: The shroud is partially cut out, in order to be a tight fit to a cooler with the mounting tabs cut off. If you will be keeping the tabs on your cooler intact, you will need to cut out additional notches in the shroud.
Note 2 : Although the manufacturer has named this duct an 8 1/2" x 11" size, nothing in their drawing indicates an 8 1/2" measurement. The actual outlet opening is 10" tall x 11" wide.