Brand: Wilwood Engineering
Fits Wilwood DynaPro (including forged & billet, lug mount & radial mount), DynaPro Narrow Radial Mount, and DynaPro DPHA 4-piston calipers using a central bridge bolt or two retaining pins. Not for older calipers that only use a central retaining pin. 0.49" (12mm) overall thickness including backing plate.
This pad has the same dimensions as the original Wilwood 7212 / Hawk HB237 / PFC 7754 pad shape for the Wilwood Dynalite Bridge Bolt caliper, but with raised corners instead of two central tabs straddling the bridge bolt. Note that the original 7212 pad shape is no longer offered by Wilwood. This 7812 shape is the recommended replacement.
BP-40 - Smartpad BP-40 is a very high-friction racing compound with an extra-high heat range. Cold friction is lower than the A or H compounds, which makes it a more predictable choice for off-road racing and road racing on track with long straights. Suitable for use with iron, or steel rotors, but the friction has been tuned to be especially good on titanium rotors. BP-40 is the suggested replacement for the BP-30 compound, with slightly higher friction overall but a very similar torque/heat curve.