Brand: OptiMATE Battery Chargers
This special quick-disconnect harness is similar to those included with Optimate battery chargers, but with a built-in battery status monitor. A 2-pin SAE plug on each end matches the plug on Optimate chargers and charging harnesses. Simply connect it in-line between your Optimate charger and your chosen battery charging harness. This is an ideal choice if you already have an Optimate ring terminal harness installed and don't want to remove it.
The 4-LED battery status monitor indicates resting battery voltage when parked as well as charging status when the engine is running. The LED blinks every 3 seconds to minimize power draw. Suitable for use with any 12 volt lead-acid battery (AGM, gel cell, or standard).
The SAE plugs are polarized to prevent reverse connection, and an inline fuse provides additional protection. Complete kit includes harness, fuse, and a tethered dust cap to protect the disconnected plug.
Note: For battery charging using Optimate battery chargers only. Not for use with any other brand. Not suitable for boosting or jump-starting.
