AN960 Flat Washer (100 pack)
Open End Pulled (Blind) Rivets
F3/OT-2 Clutch Disc, 7.25", 7/8x20 Spline, FF/SV
MS21042 Jetnut, All Metal Locknut
AN365 Nylock Hex Nut (MS20365)
"These guys are helpful and know what you need. Great advice, good to deal with." F.P. from New Zealand
Why use makeshift methods to align your clutch disc? Our inexpensive tool has the correct spline size and pilot shaft diameter for the Ford 1600 Kent pushrod engine.
Note that some FC cars converted to FF1600 may require the 1 x 23 Spline Clutch Alignment Tool for 2.0L Pinto (Part No. 173-40).
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
from Burlington, Ma
Comments about 1.6L Clutch Alignment Tool, 7/8 x 20:
Nice plastic, good fit.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2015 Pegasus Auto Racing Supplies, Inc. - All rights reserved