AN5 Airframe Bolt, 5/16-24 Thread
AN4 Airframe Bolt, 1/4-28 Thread
Oversize Shank Alloy Steel Male Rod End
Battery Tender Ring Terminal, 2-pin Quick Disconnect Cable
PFC Brake Disc, Van Diemen FF2000, Zetec 94+ Up Front, LH
"Good job. You guys rock. Thanks!!" J.W. from Florida
Set of two 5 1/2" clutch discs for the Tilton OT-III Dual Disc Clutch (part #173-50). One disc has the standard hub and the other has a thin hub for more clearance for flywheel bolts. Note that the stresses on the thinner hub are much more concentrated over a smaller spline area. This could result in damaged splines on higher torque applications. 7/8"-20 spline pattern. Other discs available by special order.
Tilton's minimum recommended clutch disc thickness is 0.089" on dual disc clutches. New clutch discs measure 0.104" thick.
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 262-317-1234
Technical Questions: 262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2015 Pegasus Auto Racing Supplies, Inc. - All rights reserved