Layshaft Drawbolt, fits Hewland or Webster Mk-series

The main function of the drawbolt is to keep the input shaft coupled to the layshaft whenever the engine is disconnected from the gearbox. Installing the drawbolt too tight can overstress it and break it. It should be installed just hand-tight, then loosened about 1/2 turn until the cotter pin holes line up. Fits Hewland or Webster Mk-series and Model 400 gearboxes. Replaces Hewland part number HC2363.

Note: This drawbolt is undrilled, so you can locate the hole exactly where you need it to fit your gearbox.