Soft Copper Crush Washer
Pre-Assembled Size 3 Braided PTFE Racing Hoses
Banjo Bolt, 3/8-24 Single, Standard (0.98 Shank)
3AN to 3/8 (10mm) Banjo Brake Adapter, Steel
AN316 Thin Jam Nut (Non-Locking Check Nut)
"These folks are the best -- best products, service, shipping times, etc. Have been consistently delighted with everything I've gotten from them." B.H. from Michigan
This steel banjo adapter accepts two 3AN (3/8-24, 37° flare) hose ends on opposite sides of the fitting and a 3/8" or 10mm banjo bolt in the center. This is a more compact solution than stacking two banjo fittings with a double banjo bolt. Nominally 1/2" thick, takes a full-length (0.98") banjo bolt in most applications. Sold individually.
Requires Banjo Bolt and Crush Washers, both sold separately.
1 to 5:
6 & up:
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
Good quality stuff
from Maryland, United States
Comments about 3AN to 3/8 (10mm) Double Banjo Brake Adapter:
Cleaned up the foot well nicely.
Bottom Line Yes, I would recommend this to a friend
Images shared by WACKO17
Was this review helpful? Yes / No
- You may also flag this review
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2016 Pegasus Auto Racing Supplies, Inc. - All rights reserved