Brand: Aurora Bearing Company
A PTFE-lined rod end can be too stiff for use on a throttle cable, causing a sticky pedal or even premature wear on the cable. These special rod ends are made slightly loose so the cable can pivot freely on the pedal or carburetor linkage.
This rod end has Left-Hand (turn left to tighten) 10-32 UNF female threads (note that none of our cables have left-hand threads). The ball is 5/16" wide, with a 0.19" bore to accept a #10 screw. Flats on the body accept a 5/16" wrench. This rod end will add 0.62" to the overall length of your throttle cable when screwed all the way in.
We also offer a similar 10-32 Right-Hand Thread Throttle Cable Rod End (Part No. 1275) for use with our standard Push-Pull Cables and Vernier Control Cables as well as our Custom-Made Throttle Cables. We also offer a 1/4-28 Female Throttle Cable Rod End (Part No. 1279) for cables with 1/4-28 stud ends.