Billet aluminum 28mm motor mount clamp from Odenthal Mfg. This clamp is well suited to any chassis which utilizes a rail spacing of 92mm center-to-center like our Margay karts. Each clamp includes socket head cap screw. Two clamps required per application. Use with Odenthal Base Plates, part numbers 9651-001, 9651-002, or 9651-003.
If you are unsure as to what size your particular kart needs, please measure with a dial caliper using this procedure. First, measure your frame rail diameter, then measure the total distance outside to outside on the frame rails where the engine will go and subtract the rail diameter from this number. (Example: 122mm-30mm=92mm center-to-center.)