Straight Banjo #4 Hose End, 7/16 inch
This banjo hose end fitting is designed to work with our -4 PTFE Lined Stainless Braided Hose (Part No. 3260-4, sold separately). It is easily installed in the field without any special tooling required.
These fittings are reusable, although the brass sleeve must be replaced each time the fitting is reused. One sleeve is included with each hose end. We also offer the Spare 4AN Brass Sleeves separately, Part No. 3261-4-SLEEVE.
Requires a 7/16" Banjo Bolt and two 7/16" Copper Crush Washers (Part No. 3241-7/16), sold separately.
AN Hose Ends & Braided Stainless PTFE Brake / Clutch Hose
Click image for big picture