Order before 5:00 pm Central Time for Same Day Shipping on most In-Stock orders!
Pegasus stocks more than 1,000 different silicone hose part numbers!
 
 
 
Check us out on Instagram
 
Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Self-Eject 1/4 Turn Stud Assembly, 5/16 Dia x 0.52 Length

Click for a larger picture of Self-Eject 1/4 Turn Stud Assembly, 5/16 Dia x 0.52 Length
View Catalog Page in PDF format

With these captive quarter-turn Dzus assemblies, you won't have to worry about losing expensive body fasteners. The flat-head 5/16" diameter stud is permanently assembled to a compact mounting plate. The stud is spring-loaded to pop up from the plate when not fastened. This self-ejecting feature makes it easy to spot any studs that have not been latched. It also prevents any unfastened studs from hanging up on the mating surface, making it easier to install large body panels that have many fasteners.

The plated steel stud assembly is designed to be riveted to a panel using two 1/8" diameter rivets spaced 1" center-to-center. With proper mounting the rated strength is 85 lb. in tension and 200 lb. in shear. Overall stud length: .52 inch. Nominal (working) length: .40 inch. Head diameter 5/8". Sold individually; spring receptacles are sold separately. See chart below to determine the correct spring for your application.

To find the required spring receptacle size:
Measure the total thickness of all panels to be fastened together. Add in any space between the panels caused by rivet heads holding the panels apart. Find your total thickness in the table below.

Total Thickness
of Panels to Be Fastened
Spring Receptacle Required
with 3004 Stud
0.120" - 0.149" 0.275" Spring Receptacle
Part No. 3013
0.150" - 0.174" 0.250" Spring Receptacle
Part No. 3012
0.175" - 0.199" 0.225" Spring Receptacle
Part No. 3011
0.200" - 0.224" 0.200" Spring Receptacle
Part No. 3010


Still can't figure it out?
As a quick "cheater" trick, order the shortest spring receptacle (Part No. 3010). If the assembly is not tight enough, simply add spacing washers between the spring and the panel. This moves the spring away from the stud assembly, taking up the slack.

Qty
Part No.
Price
Stock Status
3004

Condition: New

1 to 9: $2.99 

10 to 99: $2.75 

100 to 999: $2.50 

1000 & up: call    

In Stock