This spring receptacle is designed to mate with our Quarter-Turn Studs, Part No. 3004 through 3008. The plated steel spring is designed to be mounted to the backside of your fixed panel using two 1/8" diameter rivets spaced 1" center-to-center. The 0.200" height is the lowest available, adding the least amount possible to the grip length. Sold individually; stud assembly sold separately.
Total Thickness of Panels to be Fastened | Stud Required with 3010 Spring |
.200 - .224 | 3004 or 3020 |
.300 - .324 | 3005 or 3015 |
.400 - .424 | 3006 or 3021 |
.500 - .524 | 3007 |
.600 - .624 | 3008 |
Still can't figure it out?
As a quick "cheater" trick, order the shortest spring (Part No. 3010). If the assembly is not tight enough, simply add spacing washers between the spring and the panel. This moves the spring away from the stud assembly, taking up the slack.