Spring Platform Wrench
MS21042 Jetnut, All Metal Locknut
Spring Platform Wrench, Adjustable
AN316 Thin Jam Nut (Non-Locking Check Nut)
AN6 Airframe Bolt, 3/8-24 Thread
"The on-line ordering with in-stock indication is awesome! Even ordering custom numbers [vinyl graphics] was entirely painless and foolproof." G.S. from Wisconsin
Drop the hammer and screwdriver! This compact spring platform tool will get into the tightest spots. Use a standard 3/8 inch square drive ratchet wrench with an extension to reach virtually anywhere.
This super-compact tool was originally designed for spring platforms commonly used with 2 1/2 inch I.D. springs. However, it will also work with most 2 1/4 inch I.D. spring platforms. If the radius doesn't quite match your platforms, a little work with a bench grinder will help.
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
Great for tight spaces
from San Diego, California
Comments about Compact 3/8 inch Drive Spring Platform Adjuster:
These are great for adjusting spring perches in applications with tight space. You can attach them to a ratchet to get any angle necessary for access.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2017 Pegasus Auto Racing Supplies, Inc. - All rights reserved