AiM GPS05 Module for MXL, EVO3, MXL2 - 4 Meter Cable
AiM VDO 0-150 psi (10 Bar) Oil Pressure Sensor w/ Cable
16-Pin AMP Connector and Pin Kit for MXL Strada/Pista Dash
AiM MyChron Hondata Board
MXL 3.5mm Download Cable with Race Studio 2 Software
"Looked all over for a certain fitting to modify my race car. Pegasus was the only one who had it. Perfect fit! They got me up and running." K.S. from Virginia
Brand: AIM Sports
This is the same basic wiring harness included in the AiM MXL Strada Dash Display kit (Part No. MC-235, not included). It plugs into the 12-pin AMP connector to provide power, ground, CAN, and RS232 ECU connections.
Note: This harness is different than the MXL Pista version. The Strada harness does not have a provision for an RPM signal (Pin 8). All signals must come from the ECU via either the CAN or RS232 connections.
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2016 Pegasus Auto Racing Supplies, Inc. - All rights reserved