Shop With Confidence - 30 Day Easy Returns - No Need To Call
Follow us on facebook

Standard Fuel Cell Pickup Kit

Click for a larger picture of Standard Fuel Cell Pickup Kit
View Catalog Page in PDF format

Brand: Fuel Safe Fuel Cells

Replace your old fuel pickup or add a second pickup to your fuel cell. These kits include 2 feet of hose, a barbed hose fitting, 2 hose clamps, bulkhead fitting, bulkhead mounting nut, and a nylon sealing washer. (The 6AN and 8AN sizes also include a 31 micron synthetic sock filter screen.) Simply cut the hose to the desired length, install the barbed fitting in the hose, and install in your cell.

To install as a second pickup, drill a 9/16" (6AN), 3/4" (8AN), or 7/8" (10AN) hole in your fill plate. Install the bulkhead fitting with the nylon washer between the fill plate and the hex on the fitting (not between the fill plate and the nut).

You can also use a Corner Pickup Fitting (Part No. 2521) or a Surge Tank (Part No. 2538) in place of the filter screen.

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty
Part No.

Condition: New

3/8 inch Fuel Pickup with Filter, 6AN

$67.99In Stock

Condition: New

1/2 inch Fuel Pickup with Filter, 8AN

$74.99In Stock

Condition: New

5/8 inch Fuel Pickup, 10AN

$95.99In Stock
Related Product Groups
Fuel Cell Pickups & Surge Tanks

Good pickup


I am using this item as a fuel pickup in a 1953 Studebaker with original tank, LT1 and an external in line fuel fump and filter. This set up will allow me to prefilter the fuel before entering the pump. I haven't installed it yet, but I see no reason why this arrangement shouldn't provide plenty of clean fuel to the engine.


1000 Islands , Ontario, Canada


As described


Worked perfectly on the Fuel Safe fuel cell that I had rebuilt by Eagle.




Standard Fuel Cell Pickup Kit

4.5 2