Enter desired order quantities below, then click the "Add selected quantities to cart" button.
Stainless Steel Braided Racing Hose
Racing hose is lightweight, flexible and is compatible with the oils, fuels and coolants normally found in race cars (including methanol and nitromethane fuels). It withstands high temperatures and its stainless steel cover resists abrasion and corrosion. The 6AN size is the usual choice for fuel lines except for very high flow requirements. Larger sizes are most commonly used for oil lines. The continuous temperature rating is -55°F to 300°F. Sold in 1 foot increments.
| Stainless Steel Braided Fuel and Oil Hose | ||||||
|---|---|---|---|---|---|---|
| Hose Size | Hose I.D. (Inches) | Hose O.D. (Inches) | AN Fitting Thread Size | Operating Pressure | Min. Bend Radius | Part No. |
| -4 | 0.22" | 0.44" | 7/16-20 | 1,000 psi | 2.00" | 3270-04 |
| -6 | 0.34" | 0.55" | 9/16-18 | 1,000 psi | 2.50" | 3270-06 |
| -8 | 0.44" | 0.65" | 3/4-16 | 1,000 psi | 3.50" | 3270-08 |
| -10 | 0.56" | 0.80" | 7/8-14 | 1,000 psi | 4.00" | 3270-10 |
| -12 | 0.69" | 0.94" | 1 1/16-12 | 1,000 psi | 4.50" | 3270-12 |
| -16 | 0.88" | 1.15" | 1 5/16-12 | 750 psi | 5.50" | 3270-16 |
| -20 | 1.125" | 1.437" | 1 5/8-12 | 500 psi | 8.00" | 3270-20 |
This hose is designed to be used with our Reusable Aluminum Hose Ends (Part No. 3271-Size-Angle). It is not designed to be clamped onto barbed fittings.
Assembly Instructions for Steel Braided Racing Hose