Enter desired order quantities below, then click the "Add selected quantities to cart" button.
Oversize Shank Alloy Steel Male Rod End
These male rod ends provide the ultimate in strength, durability and safety. The ball, race and housing are all made with heat treated alloy steels. The ball is hard chrome plated. The housing is bright nickel plated (on most sizes) and the race is nickel plated and lined with PTFE fabric. These bearings are very resistant to loosening even when subjected to the pounding that they receive under racing conditions. Male threaded oversize shanks only. Typical male rod end shown in photo. Aurora RXAM (right hand threads) and RXAB (left hand threads) except Part No. 3063-6-8, which are Aurora AM-6T-6 (right hand threads, replaces 2057P) and AB-6T-6 (left hand threads).
| PTFE Lined Alloy Steel Male Rod Ends with Oversize Shanks | |||||
|---|---|---|---|---|---|
| Bore | Thread (UNF) | Thread Length | Center of Bore to End of Shank | Radial Load Rating (Pounds) | Part No. |
| 1/4" | 5/16-24 | 1 3/16" | 1 7/8" | 8452 | 3063-4-L or -R |
| 5/16" | 3/8-24 | 1 3/16" | 1 15/16" | 12,978 | 3063-5-L or -R |
| 3/8" | 7/16-20 | 1 5/16" | 2 1/8" | 17,508 | 3063-6-7-L or -R |
| 3/8" | 1/2-20 | 1 15/16" | 1 3/4" | 9544* | 3063-6-8-L or -R |
| 7/16" | 1/2-20 | 1 7/16" | 2 7/16" | 22,760 | 3063-7-L or -R |
| 1/2" | 5/8-18 | 1 5/8" | 2 5/8" | 30,579 | 3063-8-L or -R |
| 5/8" | 3/4-16 | 1 11/16" | 2 7/8" | 39,674 | 3063-10-L or -R |
* This size has a small head for reduced clearance. Applications requiring higher strength should use a 1/2" x 1/2-20 alloy steel rod end (Part No. 3062-8) with a reducer bushing such as our Part No. 3079-50-375.
Full Specifications for Part No. 3063 Rod Ends (PDF format)
Full Specifications for Part No. 3063-6-8 Rod End (PDF format)