Enter desired order quantities below, then click the "Add selected quantities to cart" button.
Alloy Steel Metric Rod End, Male Threaded Shank
These male rod ends provide the ultimate in strength, durability and safety. The ball, race and housing are all made with heat treated alloy steels. The ball is hard chrome plated. The housing and the race are coated for corrosion resistance, and the race is lined with PTFE fabric. These bearings are very resistant to loosening even when subjected to the pounding that they receive under racing conditions. Male threaded shanks only. Typical male rod end shown in photo. Aurora AM-M (right hand threads) and AB-M (left hand threads) series.
We also offer Metric Jam Nuts (Part No. MJAM, sold separately) for use with these metric rod ends.
| PTFE Lined Alloy Steel Male Metric Rod Ends | |||||
|---|---|---|---|---|---|
| Bore | Thread | Thread Length | Center of Bore to End of Shank | Radial Load Rating (Newtons) | Part No. |
| 6mm | M6x1.0 | 22mm | 36mm | 17,720 | 3066-M6x1.0-L or -R |
| 8mm | 8x1.0mm | 25mm | 42mm | 33,135 | 3066-M8x1.0-L or -R |
| 8mm | M8x1.25 | 25mm | 42mm | 33,135 | 3066-M8x1.25-L or -R |
| 10mm | 10x1.25mm | 29mm | 48mm | 50,227 | 3066-M10x1.25-L or -R |
| 10mm | M10x1.50 | 29mm | 48mm | 50,227 | 3066-M10x1.50-L or -R |
| 12mm | 12x1.25mm | 33mm | 54mm | 44,490 | 3066-M12x1.25-L or -R |
| 12mm | M12x1.75 | 33mm | 54mm | 44,490 | 3066-M12x1.75-L or -R |
| 14mm | 14x1.50mm | 36mm | 60mm | 71,741 | 3066-M14x1.50-L or -R |
| 14mm | M14x2.0 | 36mm | 60mm | 71,741 | 3066-M14x2.0-L or -R |
| 16mm | M16x2.0 | 40mm | 66mm | 76,291 | 3066-M16x2.0-L or -R |
Shaded rows indicate non-standard thread pitches.
Full Specifications for Part No. 3066 Rod Ends (PDF format)