Enter desired order quantities below, then click the "Add selected quantities to cart" button.
Alloy Steel Metric Rod End, Female Threaded Shank
These male rod ends provide the ultimate in strength, durability and safety. The ball, race and housing are all made with heat treated alloy steels. The ball is hard chrome plated. The housing and the race are coated for corrosion resistance, and the race is lined with PTFE fabric. These bearings are very resistant to loosening even when subjected to the pounding that they receive under racing conditions. Female threaded shanks only. Typical female rod end shown in photo. Aurora AW-M (right hand threads) and AG-M (left hand threads) series.
We also offer Metric Jam Nuts (Part No. MJAM, sold separately) for use with these metric rod ends.
|PTFE Lined Alloy Steel Female Metric Rod Ends|
|Center of Bore |
to End of Shank
|Radial Load Rating |
|6mm||M6x1.0||14mm||30mm||25,781||3067-M6x1.0-L or -R|
|8mm||8x1.0mm||17mm||36mm||33,203||3067-M8x1.0-L or -R|
|8mm||M8x1.25||17mm||36mm||33,203||3067-M8x1.25-L or -R|
|10mm||10x1.25mm||21mm||43mm||50,227||3067-M10x1.25-L or -R|
|10mm||M10x1.50||21mm||43mm||50,227||3067-M10x1.50-L or -R|
|12mm||12x1.25mm||24mm||50mm||44,490||3067-M12x1.25-L or -R|
|12mm||M12x1.75||24mm||50mm||44,490||3067-M12x1.75-L or -R|
|14mm||14x1.50mm||27mm||57mm||71,741||3067-M14x1.50-L or -R|
|14mm||M14x2.0||27mm||57mm||71,741||3067-M14x2.0-L or -R|
|16mm||M16x2.0||33mm||64mm||76,291||3067-M16x2.0-L or -R|
Shaded rows indicate non-standard thread pitches.
Full Specifications for Part No. 3067 Rod Ends (PDF format)