AN894 Female to Male AN Reducer, Aluminum

This reducer fitting will step your male AN fitting one size down. Because the fitting is one piece, there is no female flare inside to avoid damaging the male AN flare on your fitting. You must use an O-Ring (Part No. 3244-xx, sold separately) to seal the female end of the fitting. This fitting can only be used on a male fitting with a hex or other flat surface at the base. It will not seal on elbow fittings, male Tee fittings, AN flare plugs, or on the extended side of a bulkhead fitting. These AN894-style fittings conform to JIC and SAE specifications.

We also offer a Two-Piece (Swivel) AN Female to AN Male Reducer (Part No. 3228-303), which can be used in all applications which cannot use an O-ring and must seal at the flare.