Red Line Assembly Lube is designed to be applied to potential wear surfaces (bearings, bushings, etc) during engine building to prevent metal-to-metal contact during initial startup. It clings to surfaces to provide three times greater film strength than conventional black Molybdenum Disulfide greases, but it will not clog your oil filter. It is safe to use with all metals and is compatible with all petroleum and synthetic oils. It also makes an excellent rust inhibitor, allowing the storage of parts for years.
|Red Line Assembly Lube Properties|
|Color ||Timken OK Load ||Rust Test |
|Rust Test, |
100% Relative Humidity
|Copper Corrosion |
3 hrs @ 100° C
|Red ||100+ Pounds ||Pass ||Pass |
No rust after 2 years
Note: Red Line Assembly Lube may be used to lubricate bolt threads on assembly, but it is not recommended in place of anti-seize on header bolts or other high-temperature bolts.