AN960 Flat Washer (100 pack)
Steel Clevis for 5/16-24 Master Cylinder Pushrod, 5/16" Hole
AN6 Airframe Bolt, 3/8-24 Thread
MS21042 Style B Jetnut, All Metal Locknut
AN316 Thin Jam Nut (Non-Locking Check Nut)
"Always my top choice for fast ordering and prompt shipment!" M.M. from New York
These pushrods have the correct head profile to fit Tilton (74, 75, or 76 Series) or AP/Lockheed ("tin can" style) master cylinders. The 4.5" pushrod is standard on all Tilton master cylinder kits. The 7" long pushrod has 5 1/2" of threads, so you can shorten it to any length required.
Enter desired order quantities below, then click the "Add selected quantities to cart" button.
3555-4.5Condition: NewSKU: 29468
4.5 Pushrod, Tilton/Lockhd 5/16-24
3555-6.2Condition: NewSKU: 29469
6.2 Pushrod, Tilton/Lockhd 5/16-24
3555-7.0Condition: NewSKU: 52863
7.0 Pushrod, Tilton/Lockhd 5/16-24