Tilton Master Cylinders
Tilton master cylinders have been a favorite for many years because of the wide range of bore sizes and because of the completeness of the 74- and 75-series kits. These master cylinders can be set up with a reservoir mounted directly on the cylinder or with a remote reservoir. All of these master cylinders use a conventional mounting pattern (two 5/16" diameter holes in a vertical line with the bore) and conventional 5/16-24 thread on the pushrod. Outlet ports are threaded 3/8-24 to accept a 3AN male fitting, 3/8-24 banjo bolt, or a 3AN male to 3/8-24 inverted flare adapter. Perfect for use as brake or clutch master cylinders.
Recent Top Seller for this product group
The Tilton 76 Series Compact Master Cylinder features a threaded inlet port designed to accept 4AN (7/16-20) fittings and direct screw-on reservoirs. Uses the same rebuild kit as the 75 series.
|$8.99||Not In Stock|
|$6.99||Not In Stock|