Pushrod, Girling Master Cylinder, 5/16-24 thread
Steel Clevis and Pin for 5/16-24 Pushrod, Long
AN316 Thin Jam Nut (Non-Locking Check Nut)
Pushrod, Tilton or Lockheed Master Cylinder, 5/16-24 thread
Steel Clevis Only for 5/16-24 Pushrod, 5/16" Hole
"Looked all over for a certain fitting to modify my race car. Pegasus was the only one who had it. Perfect fit! They got me up and running." K.S. from Virginia
This steel clevis has 5/16-24 female threads to fit standard Tilton, Lockheed, and Girling master cylinder pushrods. The 5/16" diameter cross pin is retained by a captive quick-release spring clip.* The slot is 5/16" wide and approximately 9/16" from the center of the pin to the base of the slot (1 1/4" from the pin to the end of the clevis). 5/8" wide overall.
* Wrapping the spring clip with a single wrap of safety wire will result in a more secure installation, if desired.
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
I would buy this product again and again
from Rhode Island
Comments about Steel Clevis and Clip Pin for 5/16-24 Pushrod, Short:
Awesome customer service, fast shipping, great price, great description.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2017 Pegasus Auto Racing Supplies, Inc. - All rights reserved