Your IN STOCK source for quality racing supplies!
 
Follow us on facebook
 

Air & Fuel Delivery

We carry a wide selection of fuel system components, including air and fuel filters, fuel pumps, fuel cells, and Weber carburetors.

Note: Braided stainless fuel lines and AN adapters can be found in the Plumbing section.

Air Filters By Type & Application
Air Filters By Type & Application
Air Filters By Brand
Air Filters By Brand
Fuel Safe Fuel Cells, Parts and Accessories
Fuel Safe Fuel Cells, Parts and Accessories
Fueling, Filling, Refueling
Fueling, Filling, Refueling
Fuel Pumps and Accessories
Fuel Pumps and Accessories
Fuel Pressure Regulators
Fuel Pressure Regulators
OBP Fuel Scavenge Tanks
OBP Fuel Scavenge Tanks
Fuel Filters
Fuel Filters
Fuel System Plumbing Adapters & Fittings
Fuel System Plumbing Adapters & Fittings
Fuel Injection to AN Adapters
Fuel Injection to AN Adapters
Throttle Cables & Linkage
Throttle Cables & Linkage
Weber Carburetors & Parts
Weber Carburetors & Parts
Stainless Steel Wire Mesh
Stainless Steel Wire Mesh
SCCA-Approved and FIA-Approved Fuel Sampling Ports
SCCA-Approved and FIA-Approved Fuel Sampling Ports
Air/Fuel Ratio Gauges
Air/Fuel Ratio Gauges
Carburetor Air Horns and Velocity Stacks
Carburetor Air Horns and Velocity Stacks
Silicone Turbo Hoses by Inside Diameter
Silicone Turbo Hoses by Inside Diameter

Inside diameters from 2.0 to 6.0 inch

Silicone Turbo Hoses by Shape
Silicone Turbo Hoses by Shape

Inside diameters from 2.0 to 6.0 inch

Recent Top Selling Products for this category

Blue Silicone Hose, Straight, 3 1/2 inch ID, 1 Meter Length
Blue Silicone Hose, Straight, 3 1/2 inch ID, 1 Meter Length

This 1 meter (39 inch) straight hose has a 90mm nominal ID to fit over 3.5" OD tubing. Classic Blue silicone rubber is built with 4-ply reinforcement for custom turbo and intake systems.

Facet Red Top Cylindrical Fuel Pump - 1/4 NPT ports
Facet Red Top Cylindrical Fuel Pump - 1/4 NPT ports

Typical flow 30 gallons per hour at 2 psi. 1/4 NPT female ports. Facet Interruptor pumps now feature reliable solid-state technology instead of points!

Weber Idle Jet, DCOE, F8
Weber Idle Jet, DCOE, F8

These Idle Jets fit Weber DCOE and 45 MCHH Carburetors. F8 bleeds air in through a 1.2mm hole in the side, making it leaner than F9 but richer than F11. Recommended when oxygenated gas is used.