SCCA-Approved and FIA-Approved Fuel Sampling Ports

With our wide selection of fittings, you can easily take a fuel sample from virtually any racing fuel system!

Our Fuel Sampling Port (Part No. 2542) is made for us to comply with SCCA requirements. Dual Viton O-ring seals provide leak-proof operation. The 1/8 NPT male thread is easy to adapt to any fuel system.

The Aeromotive Fuel Sampling Port (Part No. AEI-15631) is specifically designed for easy fuel sampling, even with sweaty hands full of adrenaline and wearing gloves.

The Staubli SPT05 and SPT08 Dry-Disconnect Plugs are FIA-approved for use as a fuel sample port. If you are racing in a non-FIA event, you will need to bring the matching Staubli socket with you to impound.

Our Schrader High-Pressure Coupler is ideal for sampling fuel from most fuel-injected cars. The coupler attaches to the Schrader valve on the fuel rail for a secure, no-leak connection.

You can also use Jiffy-tite Quick-Connect Fittings as fuel sampling ports. Simply install a valved male fitting in a Tee fitting, and keep the matching female fitting in the car for use in impound.