Your IN STOCK source for quality racing supplies!
 
Follow us on facebook
 

Oiling Systems

Pegasus carries a full range of dry sump components for Formula Ford 1600 and FF2000 / S2000, as well as oil coolers, oil filters, and Accusump oil pressure accumulators.

Oil Filters
Oil Filters
Remote Oil Filter Heads
Remote Oil Filter Heads
Oil Filter Spin-On Adapters
Oil Filter Spin-On Adapters
Oil Filter Sandwich Plates
Oil Filter Sandwich Plates
Setrab Oil Coolers and Oil Cooler Adapter Fittings
Setrab Oil Coolers and Oil Cooler Adapter Fittings
Oil Thermostats
Oil Thermostats
FF1600 Dry Sump Oil Pumps & Accessories
FF1600 Dry Sump Oil Pumps & Accessories
Ford 2.0L Dry Sump Pumps & Accessories
Ford 2.0L Dry Sump Pumps & Accessories
FF1600 Dry Sump Oil Pans
FF1600 Dry Sump Oil Pans
Ford 2.0L Dry Sump Oil Pans
Ford 2.0L Dry Sump Oil Pans
Easy-Clean Dry Sump Oil Tanks
Easy-Clean Dry Sump Oil Tanks
Toothed Drive Belts for Oil & Water Pumps
Toothed Drive Belts for Oil & Water Pumps
Oil Tank Heater Blankets
Oil Tank Heater Blankets
Accusump Accumulators & Accessories
Accusump Accumulators & Accessories
Quick-Drain Oil Pan Couplers
Quick-Drain Oil Pan Couplers
Titan CheckUp Oil Analysis
Titan CheckUp Oil Analysis
Oil Breathers & Catch Tanks
Oil Breathers & Catch Tanks
 

Related Product Categories

High-Performance Plumbing

Recent Top Selling Products for this category

3 Quart Canton Accusump Cylinder
3 Quart Canton Accusump Cylinder

If your oil system starves due to slosh under high g-forces, this Accusump feeds up to 3 quarts of pressurized oil to the bearings to protect your engine.

Setrab M22 to 10AN Reusable Hose End, 90 Degree
Setrab M22 to 10AN Reusable Hose End, 90 Degree

This Setrab M22 to 10AN Reusable hose end screws directly into your Setrab oil cooler. It connects directly to a standard 10AN braided stainless hose without a separate hose end.

Setrab M22 to 10AN Banjo Adapter Kit, 90 Degree
Setrab M22 to 10AN Banjo Adapter Kit, 90 Degree

This low-profile banjo-style O-ring port adapter connects a standard 10AN hose end to your Setrab oil cooler. M22x1.5 threads are standard on Setrab oil coolers. Includes O-ring.