Brand: Facet-Purolator
Also known as the "Black Top" cylindrical pump, the classic Facet (formerly Bendix) Gold-Flo model 477060 fuel pump is ideal for most imported cars running low-pressure carburetors (Weber, SU, Zenith, etc). It is equally at home on many RV generators. A pressure regulator is not needed with this pump.
Facet Cylindrical pumps have low power requirements (about 1.6 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum pressure 2.75-4.0 psi. Maximum flow 34 gallons per hour. Typical applications flow 20 GPH at 2 psi or 25 GPH at 1.5 psi. (This is the lowest-pressure Cylindrical style pump available.) This fuel delivery can support up to 200 HP from a single pump. Use two pumps in parallel for higher horsepower engines. 1/8 NPT female ports. Negative ground (12v) only.
This pump features an internal 74 micron filter. This pump does not have an anti-siphon valve or a one-way valve, so fuel can flow in either direction when the pump is off. 24 inch vertical dry lift. Facet part number 477060 (E)*, supercedes 480513 (E), 480544 (E), and 480588 (E). This pump is also sold under Case-New Holland part numbers A33181, L52638, and 394327R92; Kohler part number 238953; and Onan number 149P650.
* Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! The "E" stands for "Electronic". Same function, same packaging, and same operation, but much greater reliability.
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.
