Facet 12 Volt Electric Fuel Pumps & Accessories
Racers have relied on Facet electric fuel pumps for many years. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine.
For moderate fuel requirements of engines up to about 150 horsepower, a single Solid State fuel pump is usually sufficient. For higher volume requirements, the Cylindrical pumps can deliver up to 45 gallons per hour. Pumps can also be combined in series or parallel to achieve any required pressure or flow. All of these pumps are 12 volt, negative ground. Positive ground vehicles can use these pumps with our Mounting Kit (Part No. 1130).
Installing Facet Fuel Pumps in Positive-Ground Vehicles
Where is pump number 574A?
574A is not a part number. 574A is the UL Listing number, so it appears on all Facet fuel pumps. The Facet part number is a 5- to 7-digit stamped on the mounting flange (usually 2 or 3 digits on either side of the mounting bolt hole). We can usually cross-reference your part number to one of our pumps.
Recent Top Seller for this product group
This Facet Cylindrical 12v fuel pump delivers up to 34 GPH or 4 psi max pressure. An internal anti-siphon valve prevents fuel from flowing through when the pump is off. 1/8 NPT female ports.