For low fuel requirements on engines up to about 150 horsepower, a single Solid State pump such as this one is usually sufficient. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 32 gallons per hour at free-flow. Maximum pressure 9 to 11.5 psi. Typical flow 15 gph at 5 psi. 1/8 NPT female ports.
This pump does not have an anti-siphon valve, so fuel can be pulled through the pump when it is off. A one-way valve ensures that fuel will flow in only one direction. 96 inch minimum dry lift rating lets you mount this pump up to 8 feet above the fuel level. This model has been installed as original equipment on mobile refrigerated equipment from Reefer Cool, Thermo-King, Transicold, and many others. It can also replace Facet 40272 in most applications (all specs are the same except for a ring terminal on the positive wire of this pump instead of a Packard connector on the 40272).
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere. Facet pumps are still Made in the USA.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.