Female Tee Fitting, 1/8 NPT Brass
1/8 NPT to 5/16 (8mm) Hose Barb Fitting, Brass - Right Angle
Fuel Sample Port with Dual Viton Seals
Fuel Filter, 1/8 NPT to 5/16 Hose, 74 Micron
Facet Mounting Kit for Fuel Pumps
"Chris & Carla: Just a note about the great article in PRI Magazine. Everyone is very glad you're back at the helm of Pegasus Auto Racing Supplies." G.G. from Illinois
This brass adapter is useful for connecting rubber fuel line to fuel pumps, pressure regulators, carburetors, or Tee fittings. Use with standard worm drive hose clamps.
Note: NPT nomenclature can be confusing because the nominal size refers to the inside diameter of the pipe, not the outside diameter of the threads. Male 1/8 NPT threads measure approximately 3/8" OD. For more information, check in our Guide to Using NPT Fittings.
1 to 9:
10 & up:
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
A very good product
from Texarkana, Ar
Comments about 1/8 NPT to 5/16 (8mm) Hose Barb Fitting, Brass - Straight:
I'm using this fitting on a VW trike and it worked great.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2016 Pegasus Auto Racing Supplies, Inc. - All rights reserved