Silicone Turbo Hoses by Inside Diameter
These Silicone Turbo Hoses are the same construction as our Silicone Coolant Hoses, but in larger sizes for turbo feed and intake applications. Working pressure varies by size (the largest size, 6 inch diameter, has the lowest working pressure of 15 psi / 1 bar).
These hoses are for use on intake systems only. They are NOT for use on exhaust! The temperature range for all sizes is -58°F to 356°F.
We also offer many Silicone Coolant Hoses and Elbows in smaller sizes down to 1/2" ID!
Related Product Categories |
Air & Fuel DeliveryColdside ComponentsHoses and Couplers for Turbo and Intake PipingSilicone Hose for Cooling Systems or Intake Systems |
Recent Top Selling Products for this category | ||
| Price Reduced! Black Silicone T-Hose, 76mm (3.00") ID w/25mm (1") ID Branch  Our Tee hose has a 1" ID branch to add a blow-off valve, gauge sender, or even a drain to your turbo or intake system. Black silicone rubber has 3-ply reinforcement. | Price Reduced! Black Silicone Hose, 2 1/2" I.D. 90 degree Elbow, 6" Legs  Our 2.50 inch ID 90 Degree Elbows are designed for custom coolant plumbing. Black silicone hose has 4 ply reinforcement with 6 inch long legs. | Price Reduced! Blue Silicone Hose, 2 3/4" I.D. 90 degree Elbow, 6" Legs  Our Blue silicone hose is designed for turbo and intake systems. This 90 degree elbow has 4-ply reinforcement and extended 6" legs. The 70mm nominal ID fits over 2.75 inch tubes. |