Red Silicone Turbo Hoses & Elbows 2 3/8" (60mm) ID
These flexible intake pipe connectors all have a 2 3/8" (60mm) ID. The reinforced 4-ply construction results in a 5mm nominal wall thickness (70mm / 2 3/4" OD) and is rated for a minimum 18 psi working pressure.
For use on the intake side only. Not for use on the exhaust side of turbo systems.
Recent Top Seller for this product group
Use our 2 3/8 inch OD anodized aluminum joiner to connect any two 60mm ID rubber hoses - an elbow to a straight section, two elbows, or a reducer to an elbow.
* Quantity Pricing Available