Enter desired order quantities below, then click the "Add selected quantities to cart" button.
Part No.: 6180-Thickness-Size
Jabroc Skid Plate Material
Jabroc skid plate material is a high-density wood laminate that is manufactured using extremely high pressure and temperature. Its predictable and uniform friction and wear characteristics make it an ideal skid plate material. When applied to vulnerable areas on the bottom of your vehicle's chassis, it protects the structure from damage during bottom-out situations and is easily replaced when it wears thin. Jabroc parts can be fabricated using standard metalworking or woodworking tools.
Jabroc is longer-wearing and less expensive than carbon fiber. It is about half the strength of steel, but it is 80% lighter than steel. It is also quicker to machine than steel, which means savings on fabrication costs. Jabroc is non-conductive and non-sparking, which increases safety when used for skid plates. The specific gravity is between 1.3 and 1.45, which meets the requirements for Formula 1 skid plates. Formula 1 requires the 10mm thickness.
Now in more thicknesses!
We now stock Jabroc in nominal thicknesses of 4mm (5/32"), 5mm (3/16"), 6mm (1/4"), 8mm (5/16"), 10mm (3/8"), 12.7mm (1/2"), and 25mm (1").
Available in UPS-shippable quarter sheets (nominally 50cm x 100cm, approximately 19.5 x 39 inches) and eighth sheets (nominally 50cm x 50cm, approximately 19.5 inches square).
Now shipping full sheets!
The full 100cm x 200cm (approximately 39" x 78") sheets of Jabroc are too large to be shipped by UPS, but we can ship them via truck freight. This requires a special over-sized pallet (sold separately at cost: $23.79). If you are in the Milwaukee area, you can pick up full sheets of Jabroc from our warehouse in New Berlin WI.
Pegasus Auto Racing Supplies, Inc.
2475 S 179th St
New Berlin WI 53146 USA
• Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 262-317-1234
