Pre-Assembled Size 3 Braided PTFE Racing Hoses
Stainless Braided PTFE Brake, Clutch & Power Steering Hose
High Temp 1-Ply Silicone Air Duct Hose, 450F, Orange Only
High Temp Silicone 2-ply Air Duct Hose, 450F, Orange Only
Pre-Assembled Size 4 Braided PTFE Racing Hoses
"I've always had good success with my dealings with Pegasus. The only snafu was an experiment in shipping which didn't go as planned. One time out of 50+ purchases in 7 years. Not a bad record." T.M. from Indiana
Brand: Tilton Engineering
One of the major features of the Tilton 77-Series Rear Pivoting Master Cylinders is the ability to fine-tune the location of the cut-off port. This allows you to adjust pedal free play exactly where you want it to suit your driving style. These shims will fit 15/16" and 1" bore sizes. Shims are sold in packs of 5. Note: Tilton 77-Series master cylinders are hand-built and individually blueprinted for cut-off port travel. There is no "standard" shim size, as each master cylinder ships from the factory with whatever shims are required for uniform cut-off port location.
Enter desired order quantities below, then click the "Add selected quantities to cart" button.
TE 77-416-020Condition: NewSKU: 48909
.020" Shim Kit for 15/16 or 1" 77-Series Cylinder
TE 77-416-030Condition: NewSKU: 48910
.030" Shim Kit for 15/16 or 1" 77-Series Cylinder
TE 77-416-040Condition: NewSKU: 48911
.040" Shim Kit for 15/16 or 1" 77-Series Cylinder
TE 77-416-050Condition: NewSKU: 48912
.050" Shim Kit for 15/16 or 1" 77-Series Cylinder
TE 77-416-060Condition: NewSKU: 48913
.060" Shim Kit for 15/16 or 1" 77-Series Cylinder