This handy kit from Jiffy-tite makes it easy to add a clean-break quick-connect fitting to your Holley Dual Feed carburetor! Simply thread the male plug adapter into your carburetor and install the socket hose end onto your standard 8AN braided hose.
When connected, the fittings will flow up to 260 GPH*. Pulling back the gold-colored collar on the socket fitting will disconnect the fittings with no leakage from either side. Standard fluorocarbon seals are resistant to most racing gasoline. The 7/8-20 male thread fits Holley Dual Feed 750 through Dominator 1350 series as well as Quadrajet carburetors (up to 1974). Kit includes two plug adapters, two sealing washers, and two socket hose ends (enough for one carburetor). Not for use with PTFE-lined hose.
* The Jiffy-Tite 3000 series flows 4.34 GPM with a 5 psi inlet pressure through a mated pair of valved fittings attached to 3 feet of -6 hose (flow tests based on Stoddard solvent at 80°F.)