Brand: Tilton Engineering
| This item qualifies for FREE Shipping in the continental United States! |
This self-priming pump is specially designed for transmission and differential oil cooling. The pumping elements are designed to handle the fine metal particles always present in gearboxes, but an in-line filter screen is recommended to keep out any larger particles.
This 12 volt electric motor weighs 6.5 pounds and has a built-in mounting bracket. The pump head can be rotated in 90 degree increments for the most convenient port location. This pump can also be used as a scavenge pump, turbo oiler, cool suit pump, or any other application requiring a quality, low pressure electric pump capable of circulating one to two gallons per minute flow rate. Capable of continuous duty with no cool-off or rest period required. Ideal for endurance races lasting longer than 2 hours!
- 50 psi maximum pressure at 0.4 gpm flow rate
- 1.9 gpm maximum flow (1.5 gpm at 10 psi typical)
- Maximum operating temperature: 160° F (70° C) constant; 265° F (130° C) intermittent
- Buna-N (nitrile) diaphragm and seals compatible with oil or water / coolant
- 6.5 pounds
- 8.7 inches long x 3.1" diameter (3.62" with mounting bracket)
- 12 volts DC, 6 amp maximum current draw
- Self-priming up to 8 feet vertical draw
- 3/8 NPT female inlet and outlet ports
Replacement parts available separately:
Buna Diaphragm Kit with Pistons (Part No. TE 40-902)
Buna Check Valve Assembly (Part No. TE 40-934)
We also offer a 12 Volt Electric Fluid Pump for Intermittent Duty (Part No. 1239) for use in 2-hour cycles (2 hours on / 15 minutes off).
