These are the same posts used in our Gearset Organizer Cases (formerly Part No. 1402). For those who wish to construct their own gearset case, these injection molded gear posts are available separately. They are specially manufactured to fit the Hewland / Webster Mk 8/9 gears (1.0" diameter layshaft). Includes mounting screw and high-visibility label to mark the gear ratio.
We recommend placing these posts with 2 1/4" (58mm) of space between them, and with 1 1/8" (29mm) of space between the post and the edge of your case. This will allow sufficient room for all of your gears with a slight gap between them for safety.