AiM 7-Pin SmartyCam to 2-Wire External Power Cable, 2m

Brand: AIM Sports

This special cable has a 7-pin 712 (screw-in) connector on one end and two unterminated wires (red +12v and black GND) at the other. This allows you to connect your original AiM SmartyCam (2009-2013) or the current AiM SmartyCam HD Rev 2 (2015+) stand-alone camera to vehicle power. It is not used when the SmartyCam is connected to an AiM Bridge or AiM data logger (including SoloDL). 2 meter (6 1/2 ft) length.

Compatible with:
Original SmartyCam (2009-13, with the viewing screen on top)
SmartyCam HD "Rev 2" or later (2015+)
SmartyCam HD GP "Rev 2.1" or earlier (to 2018)

Not compatible:
AiM SmartyCam HD (version 1)
AiM SmartyCam HD GP 2.2