AiM Solo2DL/EVO4S ECU Cable, Ducati 2007+ w/ DDA Connector

Brand: AIM Sports

This special ECU interface cable is designed specifically to plug into the stock ECU wiring harness on 2007 and later Ducati motorcycles equipped with the DDA (Ducati Data Analyzer) connector. One end of the cable plugs into the DDA connector located under the seat. The other end has a 7-pin "712" (screw-in) connector to fit the AiM SoloDL* or Solo2DL* lap timer or the EVO4S** logger.

Fits:
2007-2013 848 all (with DDA only)
2007-2009 1098 all (with DDA only)
2009-2011 1198 all (with DDA only)
2009-2011 Hypermotard 796
2010-2011 Multistrada 1200
2012+ Panigale V-Twin (all)
2018-2020 Paginale V4

Solo2DL note: The Solo2DL has an 8-pin female port that will accept the 7-pin connector on this cable. The missing center pin is not needed for this configuration.

* For SoloDL / Solo2DL only, not for standalone Solo/Solo2.
** For EVO4S only, not for EVO4.
Not for use with any other AiM dash or logger not listed here.