Motorcycle-Specific Cables for AiM SoloDL/Solo2DL and EVO4S
These cables make it easy to get information from your bike's stock ECU without adding any additional sensors. In most cases, installation is plug-and-play: Just locate the stock diagnostic connector, connect the cable, and specify the appropriate ECU in Race Studio.
All of these cables have a 7-pin "712" (screw-in) connector to work with SoloDL, Solo2DL, and EVO4S (note that MC-577 and MC-641 only work with the EVO4S, not the SoloDL/Solo2DL; MC-610 and MC-610-BMW-001 only work with the SoloDL/Solo2DL, not the EVO4S). None of these cables will work with any other dash or logger.
Solo2DL Note: These cables plug into the 8-pin socket on the Solo2DL. The 8th pin in the center is for an RPM signal from an old-fashioned ignition coil, so it is deleted from these cables.
Recent Top Seller for this product group
|$59.99||Not In Stock|
|$76.99||Not In Stock|